Guangxi wire cable should be damp, heated, corroded scratched. After using the wire cable for a period of time, pay attention to inspection, replace it in time if any fault is found. The wires cables should be overloaded. Regularly check the use of electrical appliances wiring in the home, maintain repair them in time. For the lines of old buildings, if you find that the lines are flooded damp, especially if the lines are repaired aged for a long time, please contact an electrician to repair them immediately. For lines prone to flooding, electricians should be required to move the lines take overhead moisture-proof measures. On rainy days, in case of power failure, immediately cut off the power supply, ask an electrician to check the cause, send someone to take care of it.Guangxi wire cable

The surroundings of the machine should always be kept clean tidy. No oil, water materials products should fall to the ground. The waste products generated due to production should be dealt with in a centralized manner in a timely manner. Wipe down clean machine surfaces whether the machine is well maintained. Check whether the surface of the machine is often cleaned, whether the tools are placed in accordance with the regulations, whether there are items that should be placed on the surface of the machine; add lubricating oil cooling oil as required, regularly check whether the oil supply system is smooth; whether there is any abnormal sound noise during the operation of the machine. Vibration, regularly check fasten the fasteners; if the transmission belt is loose deteriorated during use, it should be replaced; all machine safety doors, safety guardrails, safety covers, safety switches limit devices are complete, normal effective.

When the wire cable are laid through the pipe, the outer insulation breaks water seeps into the cable.

After the wires cables are laid, the cable heads at both ends are sealed exposed to the air for a long time.

If the laying protection work is done well, the air tightness of the terminal is good, causing water vapor to enter the inside of the cable.

Also includes local failures due to turbulence penetration of cables during operation.

Yanggu cable water treatment method:

After the electrical equipment wires cables are laid, please arrange the cable heads in time, complete the wiring, eliminate the hidden dangers in the bracket.Guangxi cable manufacturer

If the Yanggu cable has only water at both ends, simply cut the ends reconnect the cable ends.

If the wires cables of electrical equipment have obvious water ingress points, the cables must be cut near the water ingress points intermediate connections must be made.

If there is water in the outdoor Yanggu cable well cable trough, try to use the highest possible bracket to fix the cable.

Regularly conduct voltage leakage tests on wires cables used in electrical equipment to understand the running status of the cables.

All in all: the way to deal with Yanggu cable water ingress is prevention! Because once the cable enters the water, it is basically scrapped. Therefore, Guangxi cable manufacturers remind everyone that cables must be regularly inspected maintained in daily use.Guangxi cable

The above content comes the Internet. If there is any infringement, please contact us to delete it, thank you.