Wires cables are used in any construction process. Once the wire catches fire, the power outage will cause a fire accident. Guangxi cable manufacturers reminded that a large amount of smoke poisonous gas will be generated during the combustion process of the wire, which only pollutes the environment, but also endangers life.Guangxi wire cable

1. There is a problem with the quality of the wire

(1) The quality of the cable itself is too poor, the ports intermediate joints are manufactured well. (2) Continuous operation causes insulation aging short-circuit fire occurs. (3) During overload operation for a long time, the safety device cannot cut off the short-circuit current of the load in time, resulting in overheating of the insulation, thus causing a short-circuit fire. (4) Caused by external mechanical damage. (5) The oil leakage of the oil-filled cable causes a fire.

2. External reasons

(1) During construction, the slag ignites the cable when the metal is cut by electric welding. (2) Fire caused by other electrical failures. (3) The fire prevention measures in the cable tunnel are improper, the power cable is immersed in water causes a fire. (4) Rats may also cause the cable to catch fire.

3. Prevention

(1) Good construction environment to ensure construction quality. (2) a reasonable wire according to the load, the capacity of the wire should also leave room as much as possible. (3) Improve the blocking measures for the intermediate joints of the wires, regularly check the terminal ends of the wires the intermediate joints. (4) Regular inspection of the line. (5) Do a good job in accident prevention drills. (6) Strengthen the installation of fire-extinguishing equipment install fire-fighting alarms to deal with the induced fire in a timely manner.

Since the establishment of the Youzi factory, it has been taking the road of "responsibility casting quality, honesty guiding development", always adhering to the quality policy of "quality first, customer first", has formulated a complete quality management system process. The internal control standards carry out strict process control, rely on the "three inspection system" (self-inspection, mutual inspection, special inspection) to check products.Guangxi cable

The above content comes the Internet. If there is any infringement, please contact us to delete it, thank you.